Lenovo THINKCENTRE 6396 Uživatelský manuál stáhnout pdf (Strana 69)

Diagnostic Error Code FRU/Action

018-250-XXX

PCI Card Services error

1. PCI card

2. Riser card, if installed

3. System board

020-000-XXX

PCI Interface Test Passed

No action

020-0XX-XXX

PCI Interface error

1. PCI card

2. Riser card, if installed

3. System board

020-195-XXX

PCI Test aborted by user

Information only

Re-start the test, if necessary

020-196-XXX

PCI test halt, error threshold exceeded

1. Press F3 to review the log file

2. Re-start the test to reset the log file

020-197-XXX

PCI test warning

1. Make sure the component that is called

out is connected and/or enabled. See

Chapter 6, “Using the Setup Utility,” on

page 49

2. Re-run test

3. Replace the component that is called out

in warning statement

4. Replace the component under test

020-198-XXX

PCI test aborted

1. If a component is called out, make sure

it is connected and/or enabled. See

Chapter 6, “Using the Setup Utility,” on

page 49

2. Flash the system and re-test. See

“Updating (flashing) BIOS from a

CD-ROM or diskette” on page 152

3. Go to “Undetermined problems” on page

78

020-199-XXX

PCI test failed, cause unknown

1. Go to “Undetermined problems” on page

78

2. Flash the system and re-test. See

“Updating (flashing) BIOS from a

CD-ROM or diskette” on page 152

3. Replace component under function test

020-262-XXX

PCI system error

1. PCI card

2. Riser card, if installed

3. System board

025-000-XXX

IDE interface Test Passed

No action

025-00X-XXX

025-01X-XXX

IDE interface failure

1. IDE signal cable

2. Check power supply voltages

3. Reseat IDE signal cable

4. IDE device

5. System board

Chapter 7. Symptom-to-FRU Index 63

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 163 164

Komentáře k této Příručce

Žádné komentáře