Lenovo ThinkServer TD340 Uživatelský manuál stáhnout pdf (Strana 17)

LPe12000, LPe12002 and LPe12004 Hardware Installation Manual Page 14

Laser Safety Notice

This laser safety information contains certification and product information covering laser products

known as optical small form factor transceivers incorporated in Emulex LightPulse host adapters. The

small form factor transceiver is the primary cable connection mechanism for any optical port on the host

adapter. This data is not intended to be a replacement for any safety regulations and standards; relevant

safety documents should always be consulted if necessary. Contact Emulex Corporation with any

questions or concerns about laser safety.

Certification and Classification

The LPe12000, LPe12002 and LPe12004 host adapters may contain one or more examples of a laser

product known as a small form factor transceiver. This transceiver provides the physical connection to

the optical cable, and its LC-style connector extends through the mounting bracket. In turn, the host

adapter can be inserted into any host system's appropriate PCIe expansion slot.

In the United States, all optical small form factor transceivers sold by Emulex are certified as Class 1

laser products that conform to the requirements contained in the Department of Health and Human

Services (DHHS) regulation 21 CFR subchapter J. The certification is indicated by a label located on the

optical small form factor transceiver.

In Europe, all optical small form factor transceivers sold by Emulex are certified as Class 1 laser

component assemblies that conform to the requirements contained in the CENELEC (European

Committee for Electrotechnical Standardization) standard EN60825-1:1994 (including amendment 11)

and EN60825-2:1994. Small form factor transceivers are certified by a recognized European testing

agency and have appropriate markings on the assembly. The DHHS conformity label and European

conformity mark will not be visible externally once the optical small form factor transceiver is connected

to or inserted in the host adapter and the adapter is installed into a system.

Labeling Requirements

No caution or danger labels are required for use of the small form factor transceiver since they are Class

1 laser component assembly. In the U.S., the only laser safety label required is the DHHS certification

label that already appears on the small form factor transceiver. In Europe, the EN60825-1/EN60825-2

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Žádné komentáře

Lenovo ThinkServer TD340 Uživatelský manuál Strana 17